Guías de diseño
Especificaciones, notas de selección y guías técnicas para el diseño de cilindros hidráulicos.
Buscar por tipo de recurso
Guías destacadas
Todos los artículos
O-Rings and Static Seals in Hydraulic Cylinders: Squeeze, Glands, and Back-up Rings
Understand O-rings and static seals in hydraulic cylinders, including squeeze, gland fill, pressure direction, back-up rings, and replacement checks.
Hydraulic Wear Rings and Guide Rings: Function, Clearance, and Load
Understand hydraulic wear rings and guide rings, their support role, clearance requirements, and why bearing pressure differs from fluid pressure.
Hydraulic Wiper Seals: Contamination Control and Rod Seal Compatibility
Learn how hydraulic wiper seals exclude dirt and moisture, how single and double lips differ, and what to review before…
Hydraulic Rod Seals: Oil Control, Lubrication, and Buffer Seals
Understand how hydraulic rod seals retain oil, work with buffer seals and wipers, and depend on rod condition, lubrication, and…
Juntas de pistón en cilindros hidráulicos: función, tipos y límites
Descubre cómo las juntas de pistón separan las cámaras de los cilindros hidráulicos, por qué es importante la dirección de la presión y qué hay que comprobar antes de elegir un recambio.
Juntas de cilindros hidráulicos: tipos, ubicación y cómo funcionan conjuntamente
Understand hydraulic cylinder seals, their locations and functions, and the operating details needed to review a complete sealing system.
Hydraulic System Specification and RFQ Checklist: Scope, Interfaces, and Acceptance
Prepare a hydraulic system specification and RFQ checklist covering machine duty, component scope, interfaces, controls, documentation, and acceptance evidence.
Hydraulic Test Bench Sensors and Instruments: How to Select the Channels
Select hydraulic test bench sensors and instruments by test purpose, range, uncertainty, response, and installation, then verify the complete measurement…
Cómo elegir la longitud de carrera de un cilindro hidráulico: geometría y ajuste
Choose hydraulic cylinder stroke length by checking machine geometry, retracted length, tolerances, cushioning, and rod support, with a worked example.
Hydraulic Test Bench Acceptance Test Checklist: FAT, SAT, and Evidence
Use a hydraulic test bench acceptance test checklist to define FAT and SAT evidence, measurement checks, operating points, data records,…
How to Size a Hydraulic Oil Tank
Size a hydraulic oil tank with a system volume balance, cylinder displacement, accumulator demand, drainback, thermal allowance, and operating-level checks.
How to Choose the Right Reservoir Size for a Hydraulic Power Unit
Choose an HPU reservoir using usable oil volume, cycle demand, oil-level limits, orientation, air release, cooling, and supplier verification requirements.
¿Necesitas ayuda con este tema?
Nuestros ingenieros están a tu disposición para ayudarte a encontrar la solución hidráulica más adecuada.